Body buck construction

The construction of the body buck followed the template in the Appendix of the Mk IV manual.  Parts included:

• 1 sheet of  4 ft. x 8 ft. x 1/2” plywood
• 2  pieces of 4” x 4” x 6 ft. timber for upright supports
• 5 pieces of 2” x 4” x 8 ft. timber for cross pieces
• 4 castors
• A number of 3/8” x 3” or 4” lag screws
• 1/2 “ ID foam tubing (sliced to from a ‘U’) for cushioning the body on the buck

I bolted the parts together to facilitate later storage or transport.